400mm Pouch Cell Gas Driven Top and Side Hot Sealing Machine
Brief Introduction
STC-BRF-G400 is a hot sealing machine, mainly used for pouch cell aluminum cup edges with tabs before electric liquid filling process. The sealing head is made of copper with a good heating conduction, the heating temp of upper and lower sealing head was controlled separated and can be setable.
Key Features
● Upper and lower sealing head temperature can be controlled separated, temperature is adjustable and digital display by thermostat.
● Sealing head is made of copper with a good heat conduction.
● Pressure gauge is embedded and easy to check the sealing pressure.
● Firmly sealing.
● Within the safety protection cover to avoid scalding.
● Sealing time can be adjusted by timer.
● The sealing blade length is 400mm, battery case < 400mm can be used without replacing sealing blade.
Technical Parameters
| Model |
STC-BRF-G400 |
| Voltage |
AC220V±10%, 50Hz |
| Power |
1KW |
| Sealing blade length |
400mm |
| Sealing blade width |
5mm±0.4 as standard, (3-10mm is optional) customized size is available |
| Side edge sealing thickness |
60-300μm (depends on the aluminum laminated film thickness) |
| Top edge with tab sealing thickness |
200-700μm (depends on the aluminum laminated film thickness) |
| Applicable battery sizes |
Side edge length≤ 380mm
Top edge length≤380mm (including air bag size)
|
| Hot sealing temperature |
RT~250℃ adjustable |
| Temperature control accuracy |
±2℃ |
| Main cell to heat sealed edge distance |
1~5±0.4mm adjustable |
| Sealing time |
2~3s as standard (0~99s adjustable) |
| Sealing stamp thickness accuracy |
Sealing thickness difference between any two points <15μm |
| Operation mode |
Auto and manual |
| Compressed air |
5~8kg/cm2 |
| Air pressure working speed |
≥ 400 times/h |
| Dimension |
L500 * W530 * H480mm |
| Weight |
60kg |
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch, which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site installation service.
Product Tags:
|
|
400mm Pouch Cell Gas Driven Top and Side Hot Sealing Machine Images
|
